Product Description

Kitchen Maker DIY Flat Pack Kitchen M/W Wall Unit is part of upper unit for microwave setting in kitchen,wall cabinet is not only enlarge your kitchen space also Maximize the use of kitchen space.

Product Detail

Kitchen Maker DIY Flat Pack Kitchen M/W Wall Unit

 

The microwave oven is best placed on a fixed and stable table, and requires more than 10 cm of ventilation space on the top, rear, left and right of the microwave oven.
Tips:

 1) The location of the microwave oven should be selected in flat pack M/W wall cabinet which is a dry and ventilated place, and should not be placed in a place where hot air, water vapor and tap water can enter or splash into the microwave oven, so as to avoid failure of the electrical components in the microwave oven.
(2) When choosing the companion device for placing the microwave oven, try not to be too close to home appliances such as TV sets, video recorders and radios, so as not to generate noise and affect the viewing effect.
3)Due to the high power of the microwave oven, there should be a well-grounded three-pin socket near the microwave oven. It is best to use a special line for the microwave oven, which can ensure the absolute safety of the microwave oven.



 

Factors of Flat Pack Kitchens Wardrobe 1 Door Wall Cabinet

 

☞Kitchen Maker DIY Flat Pack Kitchen M/W Wall Unit is made by eco-friendly moisture fiber chipboard.

☞Door can be opening door or flap up door.

☞600 mm wide is exact sizes any model of M/W.

☞16/18mm solid back panel is more stable structure and more durable.

☞No back panel for heating heat dissipation.



Kitchen Maker DIY Flat Pack Kitchen M/W Wall Unit material parameter

 

ITEM

Flat Pack Prices,Diy Cabinets,Flat Pack Laundry Nz,Diy Kitchen Cabinets Maker,Flat design Kitchen

Cabinet Code

WMXX72(XX is cabinet wide)

 thickness

16,18mm

 Material

Particle board/plywood

 Color

White or Grey

Grade

E0,E1(Formaldehyde emission≤0.08mg/m3)

Cabinet wide

200-900mm

Hinge

DTC,Blum soft closing type

Leg

N/A

Drawer

N/A

Door material

18mm MDFMelamine,Laminate,PVC(Thermofoiled),Lacquer,Acrylic,Laminate

MOQ

20GP(About 200-300 cabinets)

Packing

Flat packing/Knock down packing


Details of Kitchen Maker DIY Flat Pack Kitchen M/W Wall Unit

 

①Eco-friendly particle board/plywood

All our panels comply with emission class European E1 and meet the stringent California Air Resources Board(CARB) emissions standards.



②Perfect melamine Edge banding

The benefits of the four-sided edge-sealing cabinet design are not only to reduce the release of formaldehyde, but also to prevent moisture from entering the board substrate to prevent deformation



③Cabinet connect hardware

Cooperate with international top brands: BLUM &DTC. 50 years of service life. Passing 200,000 opening and closing cycle test.




Kitchen Maker DIY Flat Pack Kitchen M/W Wall Unit internal structure

 

Sizes:600mm for microwave setting

Type:two hinge doors

internal exposed same color as door panels




FAQ

 

Q:What is the sizes of microwave wall cabinet?

This includes imperial and metric sizes, our common imperial size microwave cabinet is generally 30 inches, and the metric size is 600mm.

Q:What is the depth of the Microwave wall cabinet?

It is 400mm,the back use to empty for heat dissipation.

Q:What size microwave will fit in a 30 inch cabinet?
Standard manufactured cabinetry comes in 3" increments so a 30" base cabinet is literally 30" wide but you can't fit the microwave because you have not allowed for the sides of the cabinet. 

So you would need to go to the next size up the 33" base to fit a 30" microwave. 



Products Categorys

Featured Products

Navigation