1. PET door panel
PET door panel is currently one of the most environmentally friendly materials for cabinets and wardrobe door panels, reaching the food level (material made of PET has the advantages of high strength, good transparency, non-toxic, anti-permeability, and high environmental protection. Therefore, it is widely used in All kinds of food, medicine, non-toxic and sterile packaging materials: such as plastic wrap, beverage bottles, edible oil packaging bottles are made of PET materials) This is the biggest selling point of PET materials, because consumers are paying more and more attention now Environmental protection is also willing to pay more for such products.
2. Acrylic door panel
The surface of the acrylic door panel is made of polymer PMMA, commonly known as acrylic. Taking the price data of a raw material website as an example, the price of PMMA raw materials is about 20,000 yuan per ton, which is about 2.5 times the price of PVC and twice the price of PET. Most of the acrylic surface materials on the market are thicker than PVC/PET surface materials, which means that from the perspective of raw materials, the raw material cost of acrylic door panels far exceeds that of PVC/PET door panels.
Generally, the reflective effect of painted door panels and PVC/PET surface is poor and cannot clearly reflect the surrounding home still life; while the surface reflective effect of acrylic door panels is close to the mirror surface, making the entire indoor environment more transparent, and the visual effect is on the market No other high-gloss products. This excellent surface effect benefits from the precise control of process parameters and environmental dust-free effects during the production process of acrylic door panels.
3. UV board
UV plate is a decorative material that is cured by ultraviolet light after UV roller coating on the surface of the plate. In fact, under the current environmental protection situation, UV coatings, as an environmentally friendly material, have developed very fast in recent years. With high solid content, low volatile matter, high production efficiency and stable quality, it is a mature industrialized product in the current decorative market! At present, the surface hardness of UV panels is generally between 2H and 3H, and the hardness of UV panels can also be 4H~5H, but it is not suitable for custom-made door panels in the whole house. Because the hardness is too high, edge chipping will occur during the cutting process.
4. Flat door
The flat door in the market refers to the flat and non-concave process of the door panel, which is usually the paper-skin composite solid wood door that the industry said. The material used inside is all fir, the door core is filled with a semi-solid core, the surface of the paper-skin composite solid wood door is artificially late-synthesized bark, the groove depth is relatively shallow, and the paper skin is a wood-like texture.
The flat door has a long history, and its flatness and simplicity give people a sense of steadiness. Its materials are teak, maple, ash, oak, etc. It is characterized by easy cleaning, smoothness and generous. It is usually used in simple and simple home furnishings. Using natural and precious wood, the natural texture of the surface is still very fresh, giving people a refreshing feeling, and has the title of simplicity but not simplicity.
5. Blister door
The blister door is made of MDF base material. After the engraving machine is engraved and milled to form the pattern, it is finely polished, and then sprayed with special glue. After the second polishing, the surface is covered with PVC film and is formed by vacuum blister machine. The PVC film used for blister door panels generally has a thickness of 0.15mm-0.45mm.
The advantages of blister door panels are fine appearance, wear resistance, scratch resistance, high temperature resistance, good environmental performance, and flame retardant properties. In addition, the color and texture of the blister door panel is relatively rich, and the room for selection is relatively large to meet your needs for any color, and its surface can also generate various three-dimensional shapes. The disadvantage is that it is easy to deform, because the production process is hot pressing, so thermal expansion and contraction are inevitable, and the blister board will be concave in the direction of the PVC film to varying degrees after cooling.
6. Cladding door
Cladding door panels are generally MDF substrates, which are composed of four frames and a core board. The frame is a 360-degree cladding process. Then glue the PVC decorative film, but the film used for coating is generally thinner. The cold process is used. The film used for blister is generally thicker. The film is baked at high temperature to soften and then glued.
The process of cladding the door panel is more complicated and has twenty or thirty processes, which can be roughly divided into: molding, cladding, and assembly.
The door panel is covered with a covering treatment at the junction of the frame and the middle plate. This technology can better seal the release of some formaldehyde contained in the base material, making it more environmentally friendly. At the same time, because of the covering treatment, Moisture and humidity in the air are not easy to pour in, and it also ensures that the door panel is not deformed.
The cladding door is surface cladding or vacuum blister.
7. PVC door panel
PVC door panel, the back is a very common veneer. The cladding door panel is not made of a whole board, not just a groove shape or other shape on the surface, but the frame and the middle shape are made separately.
The common PVC door panel is a whole piece of board, made by some shapes on the surface. The door panel is covered with a covering treatment at the junction of the frame and the middle plate. This technology can better seal the release of some formaldehyde contained in the base material, making it more environmentally friendly. At the same time, because of the covering treatment, Moisture and humidity in the air are not easy to pour in, and it also ensures that the door panel is not deformed.
Ordinary PVC doors are shaped on the surface of the whole board, and the veneer on the back is different from the surface. These two factors increase the risk of deformation.
8. Framed door
The frame door is composed of four frames and a core board, which can also be called a five-in-one door panel, referred to as "five frame door".
The frame is a 360-degree covering process. Its wood structure is dense, unusually hard, easy to dry, stable performance, long-term color change, environmental protection and durability. The junction between the frame and the middle board is covered, which is more environmentally friendly. Because the 360-degree full covering treatment is done, the moisture and humidity in the air are not easy to invade, and at the same time, the door panel is not deformed. Advantages: no cracking, small deformation rate, clear layers, strong three-dimensional effect.
(Click on the link below to know more ↓↓↓)
polyurethane kitchen doors manufacturer
cupboard doors nz
kitchen cabinet doors nz
cabinet doors perth
vinyl wrapped kitchen door suppliers