Acceptance 1 The cabinet size should be measured
As for the size of the acceptance cabinet, of course, it is mainly based on the standard agreed between the owner and the construction personnel. The size of the bathroom cabinet is mainly used to measure several important indicators of the bathroom cabinet, such as: length, width, and height, with tape measure and caliper.
Acceptance 2 Minimal color error
Acceptance of the color requirements of bathroom cabinets mainly depends on the color depth error and the color error of the splicing place. Generally speaking, the acceptance requirements of the bathroom cabinet color are consistent in color and there should be no difference when viewed from 500mm.
Acceptance 3 Seeing that the gloss is better
Bathroom cabinets are often made of base materials and painted surfaces. Therefore, the construction and quality of the paint determine the gloss of the bathroom cabinets. The surface of the cabinet must be smooth and free of particles, roughness, oil flow, whitening, and atomization. Therefore, the previous processes such as sanding and primer must be in place, otherwise the topcoat cannot be covered. And the primer must be completely dry, and there should be no back-sticking phenomenon. There must be no scratches, scratches, stains, pinholes, spray marks, etc. on the surface of the topcoat.
Acceptance four pay attention to vertical flatness
In addition to clear appearance requirements such as size, color, and gloss, everyone should not forget the vertical flatness of bathroom cabinets. Regardless of whether it is floor-standing or suspended, pay attention to check the vertical flatness of the bathroom cabinet. The horizontal error is required to be within ±1.5mm, the diagonal error is between ±3mm, the cabinet is stable, and the sanitary products placed on it will not shake.
(Click on the link below to know more↓↓↓)